| Illustration |
Part No. |
Description |
Group
I |
Group
II |
|
100
NEW
Assembly
Specification
|
Air Gap Kit. Complete (IAPMO UPC listed). |
|
|
|
100-2
NEW
Assembly
Specification
|
Air Gap, Cap only. Note: New design will be phased in as existing stock is exhausted. |
|
|
|
101
|
One-Hole Cover Plate for Lavatory Faucets. Covers 4" center holes. Length 6-1⁄4", width 2-1⁄2". Center hole 1-3/8". Complete with gasket. |
|
|
|
102
|
One-Hole Cover Plate for Kitchen Faucets. Covers 8" center holes. Length 10-1⁄8", width 2-3⁄8". Center Hole 1-3⁄8". Complete with gasket, mounting screws & washers. |
|
|
|
103
Assembly
Specification
|
Faucet-Hole Cover. 2" diameter. Solid top for covering unused hole in sink. |
|
|
|
104
|
Reverse Osmosis Water Dispenser, Faucet part only. Requires 1-1⁄4" to 1-1⁄2" through hole. Spout 2-3⁄4" c-c & 6-1⁄4" high. Specify handle, base & tip color: White or Black. Items not specified will ship with black. FOR COLD WATER ONLY |
|
|
|
105
Assembly
Specification
|
Brasstech Water Dispenser, faucet part only. Requires 1⁄2" to 1-1⁄2" through hole. Spout 2-3⁄4" c-c & 6-1⁄4" high. Connects to water filter. Specify handle, base & tip color: White or Black. Items not specified will ship with black. FOR COLD WATER ONLY |
|
|
|
106
Assembly
Specification
|
Contemporary Hot and Cold Water Dispenser. Does not include hot water tank. Purchase of 5-036 hot water tank required. Spout c-c 4", 9-3⁄8" high. |
|
|
|
106C
Assembly
Specification
|
Contemporary Cold Water Dispenser. Spout c-c 4", 9-3⁄8" high. |
|
|
|
|
6-027
Assembly
Specification
|
Reverse Osmosis air gap for above 106C only. |
|
|
|
106H
Assembly
Specification
|
Contempory Hot Water Dispenser. Does not include hot water tank. Purchase of 5-036 hot water tank required. Spout c-c 4", 9-3⁄8" high. |
|
|
|
107
Assembly
Specification
|
Traditional Hot and Cold Water Dispenser with lever handle. Does not include hot water tank. Purchase of 5-036 hot water tank required. Spout c-c 4-13⁄16", 9-3⁄8" high. |
|
|
|
107C
Assembly
Specification
|
Traditional Cold Water Dispenser with lever handle. Spout c-c 4-13⁄16", 9-3⁄8" high. |
|
|
|
|
6-028
|
Reverse Osmosis air gap for above 108XC only. |
|
|
|
107H
Assembly
Specification
|
Traditional Hot Water Dispenser with lever handle. Does not include hot water tank. Purchase of 5-036 hot water tank required. Spout c-c 4-13⁄16", 9-3⁄8" high. |
|
|
|
107X
Assembly
Specification
|
Traditional Hot and Cold Water Dispenser with cross handle. Does not include hot water tank. Purchase of 5-036 hot water tank required. Spout c-c 4-13⁄16", 9-3⁄8" high. |
|
|
|
107XC
Assembly
Specification
|
Traditional Cold Water Dispenser with cross handle. Spout c-c 4-13⁄16", 9-3⁄8" high. |
|
|
|
|
6-028
|
Reverse Osmosis air gap for above 108XC only. |
|
|
|
107XH
Assembly
Specification
|
Traditional Hot Water Dispenser with cross handle. Does not include hot water tank. Purchase of 5-036 hot water tank required. Spout c-c 4-13⁄16", 9-3⁄8" high. |
|
|
|
108
Assembly
Specification
|
Traditional Hot and Cold Water Dispenser with lever handle. Does not include hot water tank. Purchase of 5-036 hot water tank required. Spout c-c 5-3⁄16", 8-1⁄8" high. |
|
|
|
108C
Assembly
Specification
|
Traditional Cold Water Dispenser with lever handle. Spout c-c 5-3⁄16", 8-1⁄8" high. |
|
|
|
|
6-028
|
Reverse Osmosis air gap for above 108XC only. |
|
|
|
108H
Assembly
Specification
|
Traditional Hot Water Dispenser with lever handle. Does not include hot water tank. Purchase of 5-036 hot water tank required. Spout c-c 5-3⁄16", 8-1⁄8" high. |
|
|
|
108X
Assembly
Specification
|
Traditional Hot and Cold Water Dispenser with cross handle. Does not include hot water tank. Purchase of 5-036 hot water tank required. Spout c-c 5-3⁄16", 8-1⁄8" high. |
|
|
|
108XC
Assembly
Specification
|
Traditional Cold Water Dispenser with cross handle. Spout c-c 5-3⁄16", 8-1⁄8" high. |
|
|
|
|
6-028
|
Reverse Osmosis air gap for above 108XC only. |
|
|
|
108XH
Assembly
Specification
|
Traditional Hot Water Dispenser with cross handle. Does not include hot water tank. Purchase of 5-036 hot water tank required. Spout c-c 5-3⁄16", 8-1⁄8" high. |
|
|
|
5-036
|
Hot Water Tank for 106, 106H, 107, 107H, 107X, 107H, 108, 108H, 108X and 108XH. Supplies 60 cups per hour. Temperature range is 140° F to 190° F, 115 volts. Non-Finished Item. |
|
|
|
111
Assembly
Specification
|
Soft Touch Air Activated Disposer Switch. Plugs into a standard 20 VAC wall outlet. |
|
|
|
112
Assembly
Specification
|
Garbage Disposer Flange. Fits all In-Sink-Erator models (also Kitchenaide, Emerson, Kenmore and Grainger). Made of brass. |
|
|
|
|
112A
NEW
Assembly
Specification
|
Deep Garbage Disposer Flange. Fits farm style and fireclay sinks 2-1/2" deep. |
|
|
|
113
|
Garbage Disposer Stopper. Fits No. 112 (above). Made of brass. |
|
|
|
117
Assembly
Specification
|
Universal Replacement Flange for garbage disposers. Fits most models. Easy to install. Just push into existing disposer flange. Complete with stopper. Made of heavy-duty polypropylene. Item Not Available In PVD Finish. |
|
|
|
118
Assembly
Specification
|
Universal Replacement Flange for garbage disposers. Same design as No. 117 (above) but made of solid brass. |
|
|
|
|
118-1
|
No. 118 Disposer Flange Body only. |
|
|
|
|
118-2
|
No. 118 Disposer Flange Stopper only. |
|
|
|
120
Assembly
Specification
|
Large Basket Strainer, Wing Nut Locking Style, with nuts and washers. Solid Brass. Fits 3-1/2" opening. |
|
|
|
|
120-1
|
Body only for No. 120. |
|
|
|
|
120-2
|
Basket only for No. 120. |
|
|
|
121
Assembly
Specification
|
Large Basket Strainer, Post Type, with nuts and washers. Solid Brass. Fits 3-1/2"opening. |
|
|
|
|
121-1
|
Body only for No. 121. |
|
|
|
|
121-2
|
Basket only for No. 121. |
|
|
|
122
Assembly
Specification
|
Large Brass Basket Strainer, Post Type, with strainer and nuts. Same design as polypropylene strainer No. 123 (below) but made of brass. Fits 3-1/2" opening. |
|
|
|
|
122LS
Assembly
Specification
|
Same as above with 1" extension. |
|
|
|
|
122-3
|
Body only for No. 123 in brass. |
|
|
|
|
122-4
|
Basket only for No. 123 in brass. |
|
|
|
123
Assembly
Specification
|
Large Polypropylene Basket Strainer, Post Type, with strainer and nuts. Made of polypropylene and stainless steel. Fits 3-1/2" opening. |
|
|
|
|
123LS
NEW
Assembly
Specification
|
Same as above with 1" extension. Item Not Available In PVD Finish. |
|
|
|
124
Assembly
Specification
|
Heavy-Duty Soap and Lotion Dispenser with Victorian Styling. With 2 porcelain inserts for top. One for "Soap" and one for "Lotion." Easy to apply. Solid Brass. Spout 3-1⁄8" c-c, 3-1⁄4" high. Requires 1-1⁄4" to 1-11⁄16" through hole. |
|
|
|
|
124-6
Assembly
Specification
|
Head Assembly with Pump. For No. 124, use No. 50121 for Pump and 125-9 for Bottle. |
|
|
|
|
5-004
|
Body Extension 1-3⁄8". Non-Finished Item. |
|
|
|
125
Assembly
Specification
|
Heavy-Duty Soap and Lotion Dispenser. Solid Brass. Spout 3-1⁄2" c-c, 2-1⁄2" high.Requires 1-1⁄4" to 1-11⁄16" through hole. |
|
|
|
|
125-6
Assembly
Specification
|
Head Assembly with Pump. |
|
|
|
|
125-8
Assembly
Specification
|
Pump only. Non-Finished Item. |
|
|
|
|
125-9
|
Bottle only. Non-Finished Item. |
|
|
|
|
5-004
|
Body Extension 1-3⁄8". Non-Finished Item. |
|
|
|
126
|
Economy Soap and Lotion Dispenser. Now available in all Brasstech finishes. |
|
|
|
127
Assembly
Specification
|
Heavy-Duty Soap and Lotion Dispenser with Victorian Styling. Solid Brass.Spout 3-1⁄8" c-c, 3-1⁄4" high. Requires 1-1⁄4" to 1-11⁄16" through hole. |
|
|
|
|
127-6
Assembly
Specification
|
Head Assembly with Pump. For No. 127, use No. 125-8 for Pump and No. 125-9 for Bottle. |
|
|
|
|
5-004
|
Body Extension 1-3⁄8". Non-Finished Item. |
|
|
|
10-91
|
Paper towel holder. Traditional style. Base diameter 7-1/2". Height 13-13/16". |
|
|
|
10-92
|
Paper towel holder. Contemporary style. Base diameter 7-1/2". Height 13-13/16". |
|
|
|
129
Assembly
Specification
|
Solid Brass Spray-Head Assembly for Kitchen Faucets. 1⁄8" NPT at end of hose. Can be used with Newport Brass kitchen faucets with sprays. |
|
|
|
130
Assembly
Specification
|
Jr. Basket Strainer with washers and nuts. Solid Brass. Fits 2" opening. |
|
|
|
131
Assembly
Specification
|
Midget Duo Basket Strainer with washers and nuts. Fits 2" opening. Solid Brass. |
|
|
|
200
Assembly
Specification
|
6" Shower Arm. Solid Brass. |
|
|
